Inductive Sensor For Valve Monitor

General specifications
Switching function	2 x normally open (NO)
Output type	PNP
Rated operating distance	3 mm
Installation	flush mountable
Output polarity	DC
Assured operating distance	0 ... 2.3 mm
Actual operating distance	2.6 ... 2.6 mm typ.
Reduction factor rAl	0,5
Reduction factor r304	1
Reduction factor rSt37	1,1
Output type	3-wire
Nominal ratings
Operating voltage	10 ... 30 V DC
Switching frequency	0 ... 500 Hz
Hysteresis	typ. 5 %
Reverse polarity protection	all connections
Short-circuit protection	pulsing
Voltage drop	≤ 3 V
Operating current	0 ... 200 mA
Off-state current	0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current	≤ 25 mA
Time delay before availability	≤ 500 ms
Operating voltage indicator	LED, green
Switching state indicator	LED, yellow
Ambient conditions
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type	Connector plug M12 x 1 , 4-pin
Housing material	PBT
Sensing face	PBT
Degree of protection	IP67
Tightening torque, fastening screws	M5 x 25 : 2.7 Nm
Note	Installation in housing